 |
|
Flowbench S-600 |
|
|
| DETAILS |
|
| Item Number: |
|
10462 |
| Price: |
|
$7,495.00 |
|
| Questions? |
|
Email Us |
|
|
|
| PRODUCT DESCRIPTION |
| |
The S-600 has a 14 inch water inclined manometer (for measuring flow), and two 48 inch vertical manometers. Nine 240 volt vacuum motors give it a capacity of 600 CFM at 28 inches.
600 cfm at 28" h2O
1010 cfm at 10" h2O
(make sure you check both of these capacities before you buy a flowbench)
The trend to higher capacity flowbenches has lead us to our newest bench, the S-600.
The S-600 has a 14 inch water inclined manometer (for measuring flow), and two 48 inch vertical manometers (one for depression, one for pitot tubes, carburetor jets, etc.).Nine 240 volt vacuum motors give it a capacity of 600 CFM at 28 inches .
*Simple controls easily change air flow direction for performing both intake exhaust tests.
*Six easily selected ranges provide high sensitivity at all flow levels to easily discern differences of 0.5%.
*Each bench is individually calibrated and comes with a calibration orifice to easily check calibration whenever needed.
*Every bench has a second vertical manometer for use with pitot tubes (for measuring air velocities) and carburetor jets. (Pitot tubes are optional).
*All models are constructed from 20 mm (3/4 inch) thick double phenolic panels with a high pressure laminate (aka Formica) finish.
Characteristics:
Vertical Manometers
0 a 48 (water - inch)
Vertical Manometers 0 a 122 ( water - cm)
Range (CFM) 0 - 40 0 - 80 0 - 150 0 -300 0 - 450 0 - 600
Range (lts/seg) 0 - 19 0 - 36 0 - 72 0 - 144 0 - 216 0 -288
Dimensions
Weight 450 lbs
High 77 inches
Width 36 inches
Long 27 inches
Power (Kw) 10.2
Voltage singlephase (Volts) 240
View Photos
|
|
|
|
|
|