http://www.jamisonequipment.com/rss/flow_benches.cfm Jamison Equipment Flow Benches Wed, 10 Mar 2010 18:35:20 GMT 60 http://www.jamisonequipment.com/itemdetails.cfm?Product=11879 *LOOK AT ALL PICTURES* Fri, 26 Feb 2010 17:58:02 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11859 HAND HELD INSTUMENT FOR PORT MAPPING AND MEASURING VELOCITIES IN PORTS. TUBES CONNECT YOUR AUXILLARY MANOMETER TO THE PITOT TUBE AND PRESSURE IS MEASURED Wed, 27 Jan 2010 14:55:48 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11831 BY HAROLD BETTES Fri, 18 Dec 2009 15:03:53 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11797 220 SINGLE PHASE Thu, 15 Oct 2009 19:21:27 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11765 TOM VAUGHT DESIGN Mon, 17 Aug 2009 21:17:59 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11655 The bracket is 7" long x 1.5" high. The set consists of seven balls, sizes 1/8" thru 1/2" in 1/16" increments with two flags, one straight, one bent 90º. The balls are welded to 8" rods with eyes for hanging. Mon, 09 Mar 2009 16:59:49 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11576 FOR MOST FEL-PRO GASKET NUMBERS Mon, 13 Oct 2008 19:18:15 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11494 680 cfm @ 28" h2O 1137 cfm @ 10" h2O (make sure you check both of these capacities before you buy a flowbench) Thu, 15 May 2008 15:15:09 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11309 SBC / BBC SHOWN. CALL WITH YOUR CYLINDER DIAMETER AND BOLT PATTERN. Fri, 06 Jul 2007 13:53:38 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11301 THIS IS A UNIVERSAL VALVE OPENER. Mon, 04 Jun 2007 14:57:55 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11277 Harold Bettes named dealer / consultant for Jamison Equipment Saenz flowbenches. Harold can be reached at (719)260-7129 Harolds website is www.powertechnologyconsultants.com Mon, 23 Apr 2007 13:38:53 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11263 THIS FEATURE COMES STANDARD ON ALL SAENZ J-600 AND J-1000 FLOWBENCHES. Fri, 30 Mar 2007 15:11:24 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11262 THIS FEATURE COMES STANDARD ON ALL J-600 AND J-1000 COMPUTERIZED FLOW BENCHES. THIS CAN BE ADDED TO A MANUAL BENCH AND USED WITH AUDIE FLOW PRO SOFTWARE Fri, 30 Mar 2007 15:09:45 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11261 BASE SENSOR PACKAGE (VERSION 2) USWED ON ALL SAENZ J-600 AND J-1000 SERIES FLOWBENCHES. THIS CAN BE ADDED TO A MANUAL FLOWBENCH AND USED WITH FLOW PRO SOFTWARE. Fri, 30 Mar 2007 15:07:08 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=11260 THIS SOFTWARE IS INSTALLED ON ALL J-600 AND J-1000 SAENZ BENCHES. THIS CAN ALSO BE INSTALLED ON SAENZ S-SERIES MANUAL BENCHES OR YOUR EXISTING BENCH. FOR A DEMO OF THIS SOFTWARE GO TO: http://www.audietech.com/ Fri, 30 Mar 2007 15:05:15 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=10464 The S-250 meets the need for a more economical flowbench with good air capacity which is necessary for producing the air speeds it needs to properly test heads. Four 240 volt vacuum motors give it a capacity of 250 CFM at 28 inches. Wed, 23 Jul 2003 15:40:35 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=10463 The S-400 offers high capacity and good performance. It has a 6-inch water inclined manometer (for measuring flow), and two 40 inch vertical manometers. Seven 240 volt vacuum motors give it a capacity of 400 CFM at 28 inches. Wed, 23 Jul 2003 15:40:15 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=10462 The S-600 has a 14 inch water inclined manometer (for measuring flow), and two 48 inch vertical manometers. Nine 240 volt vacuum motors give it a capacity of 600 CFM at 28 inches. Wed, 23 Jul 2003 15:39:59 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=10461 The J-600 is the first completely computerized flow bench, its changes in range and of flow (Intake/exhaust) are carried out by neumatics movements. It uses AUDIE TECHNOLOGY for its system of data acquisition, motor control, valves openers and swirl Wed, 23 Jul 2003 15:39:39 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=10460 The J-1000 is the first completely computerized flow bench, its changes in range and of flow (Intake/exhaust) are carried out by neumatics movements. It uses AUDIE TECHNOLOGY for its system of data acquisition, motor control, valves openers and swir Wed, 23 Jul 2003 15:38:30 GMT http://www.jamisonequipment.com/itemdetails.cfm?Product=10459 computer ready RPM based swirl meters avoid the calibration and zero drift problems associated with torque based swirl meters. Wed, 23 Jul 2003 15:36:51 GMT